A cost effective easy-to-use scale for both tracked and wheeled 360 degree excavators.
Weigh the amount of material in the bucket, grab or clamshell.
With the ever increasing focus on productivity, LOADEX 100 has been designed to operate within the fastest loading environments maximising tons per hour performance.Loading correctly rst time eradicates return trips to the stockpile reducing vehicle movement, fuel usage and machine & tyre wear.
Loading correctly first time eliminates return trips to the stockpile, reducing vehicle movement, fuel use and machine wear and tear.
The new LOADEX 100 uses a 7” colour touch-screen display and additional keys providing a modern and ergonomic interface.
Two pressure sensors are installed into the hydraulic lift system with up to two more installed on machines fitted with assistor accumulator cylinders.
The pressure signals are captured, filtered and corrected by measuring the angle of the main boom using an inclinometer. Slope corrections are made from another inclination sensor on the chassis.
Dipper arm position is established by a mechanical angle sensor mounted on the boom to dipper arm elbow pivot. This provides fast and precise dipper arm angle measurement that is not affected by inertia g-forces or acceleration effects.
When used dynamically, the pressures are captured through a set weighing zone. The system may also be used in static weighing mode; the boom can either be lifted to a set weighing position where the pressure is captured, or measuring constantly in a “live” mode at any required boom height. Both dynamic and static weighing positions are adjustable by the operator to suit any job required, which will enable the machine to be used at its most efficient output.
For features and specifications, please Download Brochure.